Cubitech 16CH Triplex Guia do Utilizador descarregar pdf (Página 40)

4/8/16CH Triplex DVR

Digital Video Recorder

“Sensitive Highest”: The highest sensitive level

5.3.2. Record Time

To set the motion’s record time as 5sec, 10sec, 15sec, 20sec, 25sec,

30sec, 45sec, 60sec, 90sec, 120sec, 150sec or 180sec

5.3.3. Alarm Mode

“Mute”: No beep whatever detecting.

“ Buzzer-Short”: Beep shortly by buzzer on main board when

detection is active

“ Buzzer-Long”: Beep long by buzzer on main board when detection

is active

“ Alarm-Short”: Beep shortly by speaker of system when detection is

active

“ Alarm-Long”: Beep long by speaker of system when detection is

active

5.3.4. Alarm Time

To Setup the time period of beep by “Nonstop”(no stop), 5sec, 10sec,

15sec, 20sec, 25sec, 30sec, 35sec, 40sec, 45sec, 50sec, 55sec or 60sec

5.3.5. Trigger Full Screen

To display the trigger channel on full screen when it act as 1sec, 2sec …

or 30sec.

“ OFF”: It will not display on full screen when the channel has been

triggered. Also, the trigger area will turn to “red-color”

5.3.6. Trigger Type

There are two trigger types: “Initial Trigger” and “Continuous Trigger” for

selection.

Initial Trigger: When channel has been triggered, it will display on full

screen as the setting time period. In that time period, this channel will

ignore any other trigger.

Continuous Trigger: When channel has been triggered, it will display on

full screen as the setting time period. In that time period, this channel is

still watching out. If another trigger act, the channel will display on full

screen and count all over again by the setting time period.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 94 95

Sem comentários

Cubitech 16CH Triplex Guia do Utilizador Página 40